Holemaking
TaeguTec
Grade
The ingenious solution that takes cutting tool materials to another level
- Improved adhesion and insert chipping resistance
- Stable and extended tool life in continuous and interrupted cutting operations
- Reduced cutting friction and minimized built-up edge on exotic materials
- High quality surface finish on work pieces
- Sub-micron grade with high hardness and toughness
- New Multi-layered coating for higher chipping resistance
- Special surface treatment for reduction of cutting friction & improvement of chipping resistance
- First choice for general applications
- Excellent wear resistance by fine structure coating layer
- Excellent chipping resistance by special surface treatment
- Designed specifically for the outer pocket only in steel applications
DrillRush (Head Changeable Drill)
New head-changeable drill
- Quick change system: Head indexing on the machine
- Flexibility: One drill body for a series of different sized heads
- Twisted coolant channel & polished chip gullet: Smooth & excellent chip evacuation
- Rigid connection: Remarkable performance and maximum number of head indexing
- New multi-layered coating grade (TT9080) for prolonged tool life
DrillRush for pre-thread drilling
- Cost effective solution: Replaces the high cost of solid carbide drills
- Optimal performance via balanced cutting: Double effective design
- Available for both chamfering and counter boring: Both blind & through-hole applications
DrillRush for adjustable chamfering
- Drill & chamfer in a single operation: Minimized machining time & improved economy
- Adjustable step length
- Two standard chamfering inserts enable higher productivity
SpadeRush
New head-changeable drill
- Unique quick change clamping system:
- No need to remove the insert screw from the holder to change the head
- Easier replacement of the drill head in the machine
- Two effective cutting edges for higher productivity
- Self centering design means no need for pre-centering
- Stronger rigidity of the unique screw clamp design means improved productivity
TopDrill (Indexable Drill)
Next generation indexable drill
- Remarkable machinability with high stability
- Twisted coolant channels: Improved chip evacuation and hole quality
- Applicable to a variety of materials
- Enhanced insert durability with new grade (TT9080)
- One insert for both internal and external pockets
TwinRush
High productivity head changeable drill for large diameter holemaking
- Cost effective solution: Replaces the high cost of solid carbide drills
- Optimal performance via balanced cutting
- Double effective design for higher productivity
- Precise hole size with good surface finish
TopCap (Multi-functional Tool)
Multi-functional new TopCap
- Drilling, turning and grooving
- Unique design of new grooving insert: Two cutting edges
- Same holder for both grooving & turning inserts
- New pocket design: Protects the opposite cutting edge
- Internal coolant system for smooth chip evacuation
Application
T-Deep (Indexable Gun Drill)
Deep hole drilling for conventional horizontal machining centres or lathes
- New optimum solution for drilling over 5xD: From diameter 30mm to 69mm
- Direct mounting system
- Cost saving with indexable inserts
- Wide chip gullet design enables good hole quality with smooth chip evacuation
T-Deep (Deep Hole Machining)
Optimized solutions for deep hole machining
Features
- Higher feed rates compared to gun drills
- Cost effective solutions with high productivity
- Good surface finish with high tolerance
- Wide selection of drill heads for various customer requirements
Brazed drill head
- Drill range: 8.00mm to 65.00mm
Brazed counter boring head
- Boring range: 14.51mm to 65.00mm
Indexable drill head
- Drill range: 16.00mm to 245.99mm
Indexable counter boring head
- Boring range: 25.00mm to 110.99mm
Drill tube
- Single tube system
- Double tube system
TM-Ream (Indexable Reamer)
Head changeable reamer for high speed reaming
- Quick change system: No set up time
- High speed & feed rate for maximum productivity
- High accuracy: Maximum run-out 3μm
- Highly economical: One shank for a wide range of diameters & cutting edges
- Internal coolant directed to the cutting edges: Prolonged tool life
TB-Ream (Indexable Reamer)
Single edged reamer for high speed reaming
- Two cutting edges for improved economy
- Optimal internal coolant supply system according to hole type
- Available for interrupted applications
- Extreme surface finishing and cylindricity for IT6 hole tolerance
H-Drill (Solid Carbide Drill)
- Excellent chip flow
- Low cutting force by cross thinning
- Highly rigid drill body
- High accuracy & surface finish
- Longer tool life with TT9030 grade
Solid carbide drill
Internal coolant
SHO 3 XXX – 3XD
SHO 5 XXX – 5XD
- Drill range: 3.0mm to 20.0mm
External coolant
SHD 3 XXX – 3XD
SHD 5 XXX – 5XD
- Drill range: 3.0mm to 20.0mm
Brazed carbide drill
Internal coolant
BHD 3 XXX – 3XD
BHD 5 XXX – 5XD
- Drill range: 12.0mm to 32.0mm
M.Q.L Drill (Solid Carbide Long Drill)
Solid carbide drill with M.Q.L system
Features
- Unique geometries provide high performance
- Increased rigidity and low cutting forces provide high hole quality
- Ultra-fine-substrate with TiAlN coating for high level of wear resistance & toughness
Advantage
- Deep hole drilling up to 30xD without pecking cycle
- Higher productivity levels than conventional deep hole drills like HSS & Gun drills
- Application on conventional machining center and no need for dedicated deep hole drilling machines
- Drills are available with internal coolant as well as the M.Q.L system
M.Q.L system
- Avoid generation of dioxin for the human body
- Minimized wear of machine tool
- Reduced maintenance cost
- Long tool life with production efficiency
T-Drill (Indexable Drill)
Double the holes, double the productivity
- Twisted coolant channels with high rigidity of drill body
- Bigger chip gullet for better chip evacuation
- Special treatment on the body for wear resistance & longer body life
- Square 4 corner economical insert with new PVD grade
- Reduced stock-keep costs for drill insert
Drill range
- 12.5mm to 50.0mm in 2xD, 3xD, 4xD, 5xD
- 51.0mm to 80.0mm in 2.5xD & 3.5xD
Drilling depth
- 2xD, 3xD, 4xD and 5xD