Milling
TaeguTec
ChaseMill
Now Available for Swiss Turn Machines AXCT 06-L Inserts, Holders for Miniature Machining
With the overall market trend for miniature product machining expanding due to medical instruments and precision products, TaeguTec has introduced the AXCT 06-L line of inserts and related holders specialized in the machining of these products.
The positive and ground AXCT 06-L insert is designed with a high positive rake angle so as to be optimally suited for low cutting resistance as required by miniature machining. A further advantage of the line is its compatibility with the current line of CHASEMILL cutters.
All holders are available in various standard sizes from 8 mm up to 30 mm which reinforces the line’s suitability for miniature machining.
Features
- Specialized insert geometry for Swiss turn machines
- Standard holders are available in various shank holder sizes (Available in ER11 and ER16 collets)
- Holder diameter range: 8-30 mm
- High positive rake angle means low cutting resistance
- AXCT 06-L inserts are compatible with existing CHASEMILL holders
- Available in several insert Corner R: 0,0.2,0.4 mm
- This indexable line can replace solid end mills used in the cross tool post and rear tool post
AXCT 06-L
Insert
MTE90AX-06-L…
End mill
Spare parts
Grade
The ingenious solution that takes cutting tool materials to another level
- Stable and extended tool life in continuous and interrupted cutting operations
- Reduced cutting friction and minimized built-up edge on exotic materials
- High surface finish on the workpiece
- Improved adhesion and insert chipping resistance
- High speed milling of steel
- High speed milling of hardened steel
- General machining for gray and ductile cast iron
- Finish and medium machining of hardened steel
- High speed milling of steel
- High speed milling of gray and ductile cast iron
- General milling of steel
- General milling of cast iron
- Rough milling of carbon & alloy steel
- Medium speed milling of stainless steel
- Rough machining of carbon steel and alloy steel
- Interrupted and rough machining of stainless steel
- Rough machining of heat-resistant alloy
- Medium & rough machining of steel
- General machining of stainless steel
- General machining of heat-resistant alloy
Mill2Rush
Double sided positive insert with six cutting edges
- Thick & unique geometry for high strength cutting
- Wide wiper flat gives exceptional surface finishes
- Positive axial rake angle that generates low cutting forces and delivers smooth cutting
- Ground periphery inserts for high precision machining (6NGU)
MillRush
Super high positive insert with 3 cutting edges
- Thick & unique geometry for high strength cutting
- Super high positive axial rake that generates low cutting forces
- Innovative cutting edge for effective chip evacuation
ChaseMillPower
Small but powerful positive insert with dovetail design
- 2 cutting edges and 90° shoulder milling
- 2PKT 05 insert’s high axial, positive geometry generates lower cutting force
- Double dovetail geometries for strong clamping force
- Bigger than the competitor’s screw
Chase2Mill
90 degree line with 4 cutting edges
Chase2Mill 4NKT
- True 90° shoulder milling
- High axial and radial positive geometry
- High ramp down angle
- A fine pitch cutter for high productivity machining
- Capable of multiple milling applications
90 degree line with 4 cutting edges
Chase2Mill (90 line) AN11 Series
- 90 degree cutter with 4 corner indexable inserts
- High density cutter maximizes productivity
- High positive cutting edges – smooth cutting action
- Thick insert design – stable and reliable performance
- Two insert options
- ANHX 11: Full ground edge – High precision type
- ANMX 11: High edge security – Economical choice
- Ground edge & top polished insert available for aluminum machining
90 degree line with 4 cutting edges
Chase2Mill (90 line) AN16 Series
- Various insert types enable a wider range of applications
- Expansion ML/MR & AL insert types have been added to the current M geometry line
- ANMX 16 press to size inserts designed for economical solutions
- The extended flute cutters and modular head offer more comprehensive cutting options
45 degree line with 4 cutting edges
Chase2Mill AN16 line 45° entry angle
- Combination of high positive insert with 45° entry angle: extremely smooth and silent cutting action
- High helix 4 corner insert
- Excellent surface finish with wide wiper flat
- Maximum 8.4mm depth of cut
- Full ground periphery
ChaseMill
APKT 09 line
- High helix angle decreases the cutting load to achieve a stable and smooth cutting performance
- The new face milling cutter has internal coolant while the new end mill has coolant as an option
APKT 17 line
- Higher positive helix angle for smoother machining / -7°(APKT 1705) → 13° (APKT 1706)
- Thicker and stronger insert design / -5.6 mm (APKT 1705) → 6.5 mm (APKT 1706)
- Compatible with the current line of CHASEMILL cutters & holders
APKT 19 line
- Higher helical angle of the APKT 19 insert line → Smooth machining with excellent performance
- Thicker and bigger insert → Strong and stable machining with higher productivity
- Appropriate for roughing machining in heavy industries such as power generation and wind turbine manufacturing
Chase2Feed
High feed cutters with BLMP inserts
- Particularly suitable for high feed machining
- Low cutting forces
- Four or six corner inserts for cost effective machining
- Low chipping tendency
ChaseFeed
High feed cutters with SBMT inserts
- Single sided, four corner high positive insert for high feed cutting conditions
- Lower cutting force than double sided inserts
- High helix geometry for smooth cutting
- Increased insert thickness for better endurance under high feed conditions
Chase2Mold
Economical double sided round inserts
- Unique double-sided round inserts available in shred & conventional type
- New insert and cutter pocket structure for strong & robust clamping (Anti-rotating system)
- When machining with a long overhang cutter, it is recommended that
- the shred type insert is used to reduce the cutting load
ChaseMold
Improved CHASEMOLD
RYMX/RYHX series
For contour, copy and radius milling of mold & die applications and any other demanding
operations such as roughing for aerospace parts and heavy industrial products,
customers can obtain the following benefits:
- The thick insert and extremely strong screw system on the new ChaseMold line make it suitable for heavy or demanding applications
- Reliable machining even under difficult conditions
- Inserts designed with new geometry for optimal tool life
FineBall
Accurate profile machining
- High helix cutting edges guarantee smooth and stable cutting
- The FineBall demonstrates excellent run-out and precision due to its optimised design
- Internal coolant system promotes excellent chip evacuation and prolongs tool life
- FineBall inserts asymmetric structure is designed for accurate clamping
- Enhanced contact area between insert and cutter body improves clamping and rigidity
- A symmetric structure of insert and holder enables accurate clamping
DuetBall
An excellent choice for rough & semi-finish profile milling
- Dovetail mechanism clamping provides increased security and insert clamping
- High helix cutting edge for smooth milling
- Economical double sided insert
- One insert type for both internal and external pockets means improved economy and inventory control
Chase2Ball
Optimized double sided inserts for rough milling
- Six cutting edges promote economy and productivity in cast iron and tool steel
- Low cutting resistance credit to half effective flute design
- Thick inserts (8mm) enable stable machining
- Insert design with high positive cutting edges
- Excellent performance in heat treated steel and welded components
Chase2Hepta
New milling solution for general machining of cast iron and steel
- 45° entry angle face mill available with 14 corner economical double sided inserts
- Ideal solution for rough machining on cast iron and steel
- Efficient and smooth machining credit to its positive cutting edge geometry that lowers
- cutting loads during rough machining
ChaseHepta
A new positive multi corners milling line
- Economical 7-corner cutting edges
- Higher insert thickness means better rigidity
- Smooth machining with a helical cutting edge
- Optimized chip formers for various workpieces
- M type: for steel & cast iron
- ML type: for stainless steel & difficult-to cut materials
Chase Splitter Type Inserts
- Chip splitter type inserts reduce cutting force during heavy milling
- Reduces cutting load – high table feed can be achieved
- Reduces vibration and noise
- Insert’s helical cutting edge geometry enables double feed rates
- Improves chip evacuation(chip split into small pieces) and reduces heat generation
- Splitter inserts mount on standard cutters without modifications
- Enables high feed rate at deeper depth of cut in general 90˚milling
Assembly
- Chip splitter cutting edge generates smaller chips with low cutting force and create complete cutting edges when combined
- For optimum machining efficiency, use even numbered flute cutters
LionMill
For heavy machining
Four cutting edges with 60 degree & 90 degree entering angle line
- New dovetail wedge design ensures stable and strong clamping
- Excellent chip control due to wide chip evacuation system
- Reinforced durability credit to thick shim
TrioBall
High feed rough ball
Triple feed rates for roughing and semi-roughing applications
- Effective three flute design enables high feed machining to enhance productivity
- Unique double-sided insert with two cutting edges
- A highly stable cutting performance with thick cutting edges
- Built-in through coolant generates excellent chip evacuation
TopSlot
Slot mill line with ZNHT & SLOT insert
- Smooth and light cutting from positive chip former
- Robust insert design with four corner cutting edges (2 right / 2 left corners)
- Precision ground inserts for high accuracy
Slot line with ZNHU insert
Economical double sided insert
- Standard slot width 10-26mm (fixed and adjustable type)
- Double sided durable insert with high positive rake angle for smooth cutting action
- Robust insert design with four corner cutting edges (2 right / 2 left corners)
- Simple, strong & stable adjustment mechanism with innovative design with fewer components
New slotting line with 3-edge mill grooving inserts
- Three cutting edges insert for economy: one cutting edge breaks, two remain
- Two cutter types – General type width of cut: 1.2-4.0 mm
- “B” type width of cut: 4.01-6.0 mm
- Cutter designed with a bottom relief for shallow face machining
Chase2Quad
For heavy machining
- Eight cutting edges per insert for economical machining
- Maximum depth of cut 8.8mm with 45°entering angle
- Diverse cutter types for various applications
Finish mill combination type
High speed machining of cast iron
- The combination of CBN and ceramic produces high-speed machining that leads to high productivity
- Ceramic inserts should be used with the fixed pockets and the CBN inserts on the adjustable pockets
- When applying the ceramic insert, please use a torque-adjustable wrench (torque less than 3N recommended)
- CBN inserts can be reground
ChaseQuad
- Wide range of tools for counter boring, spot facing, drill milling, plunge milling and end milling.
- ChaseQuad line also comes in extended flute end mills for the die and mold industry.
- Five sizes of inserts cover the entire range of operations
- SPMG inserts are available with chipbreakers and sharp edge geometries for drilling
- SPMT inserts with a strong cutting edge are used for general milling and roughing applications
Hexa2Mill
The optimum solution for cast iron and steel machining
- Economical 12 cutting edge insert with simple screw and wedge clamping
- Two types of screw-clamping cutters are available for steels and cast iron- 45 degrees for normal applications and 15 degrees for high feed applications
- The angled approach of the screw-clamping system improves rigidity and clamping for fine pitch cutters
- Another super fine pitch 45 degrees wedge clamping cutter is available for cast iron milling with the same inserts used in screw-clamping cutters
- Increased insert thickness (6.35 mm) for a more robust insert designed for higher feed rates
ChaseOcto
- For economical eight-edged milling with no compromises
- ChaseOcto has a proven track record
- An extensive range of inserts covers every conceivable milling application (EMR, -MR, -EM, -M, -EML, -ML, -Round and AL)
- High-shear positive inserts ensure less vibration and reduce power consumption
- Round inserts for die and mould industry can also fit the ChaseOcto line
- The super high positive ground and polished inserts are available for aluminum milling applications
ChaseSpeed
Ceramic cutter “CH” system with ceramic dimple insert
- The exceptionally strong and unique clamping system provides security and reliability when clamping the dimple ceramic insert
- The advanced ceramic grade in combination with the clamping mechanism will deliver consistent performance and extended tool life
- The new AS20 grade has been specifically developed to machine a wide range of exotic alloys including inconel, waspaloy and rene
- AS20 performs at high speeds similar to those of whisker ceramics but offers a low cost
- solution with no compromise in performance
ChaseAlu
High speed aluminum machining
CHASEALU XEVT
- Exceptional productivity for aluminum and non-ferrous material machining
- Can be applied to rough and finish machining
- Available in various corner radii (XEVT1605: R0.4-R5.0/ XEVT 2206: R0.5-R6.4)
- Secure, stable and unique “V” bottom & unique stopper design
