SFEED Tec-Line
TaeguTec
SFEED-TURN (FCMX)
High Feed Trigonal Type Positive Insert for Bi-directional Turning
» 6 cutting edge (3 index) positive type insert
» High feed machining with max. feed rate 3mm/rev
» Reduced cycle time due to bi-directional continuous turning
» Strong clamping and stable machining due to anti-rotating design
» Top and bottom internal coolant supply
» Optimized chip breaker
Right or Left Bi-directional Turning Quickens with Golden Line
Bi-directional continuous turning has reached greater heights with the new Golden SFEED-TEC TURN-SFEED family of inserts and holders. The line’s incredible feed and excellent chip control qualities are made in part to the 6 cutting edge (3 index) positive type high feed trigonal turning insert that is accentuated with anti-rotating grooves on the bottom side and an optimized chip breaker. Smooth machining and great performance during max. 3mm/rev high feed turning is achieved with the ingenious, anti-rotating design and is equipped with a strong and robust screw clamping feature. Tool life and chip control have been drastically extended with the line’s top and bottom coolant supply. The holder’s strong clamping feature easily performs both left and right directional turning without having to change the tool holder; in doing so, the Golden TURN-SFEED line reduces cycle times and machining downtime.
Capable of left and right bi-directional continuous turning
POS-S-TURN (XNMV)
70° Corner Angle Insert for Multidirectional and
High Feed Back Turning
- 70° corner angle 4 cutting edge double-sided negative insert
- R/L hand type insert with unique cutting edge design
- No down time machining thanks to multi directional turning with one tool
- High productivity with high feed backward turning up to 0.8 mm/rev
- Longer tool life thanks to the use of left & right entire cutting edge
- Compatible with existing TXJNR/L…1105(-TB) RHINOXTURN holders
Multidirectional and High Feed Back Turning with No Down Time and High Productivity
The XNMV 1105 is a double-sided 4-corner insert with a 70-degree angle. It combines the advantages of the ISO CNMG and DNMG inserts for various machining applications such as external turning, face turning and external profiling. Highly efficient machining with a maximum 3.5 mm depth of cut in both external forward turning and face turning as well as good chip control. An additional advantage of the XNMV 1105 insert is its unique high feed backward turning capability. This technologically advanced capability is made possible due to the insert’s helical cutting edge that works to reduce cutting forces as well as the insert’s lower entering angle – both features greatly contribute towards higher productivity. In addition, the insert’s rigidity is strengthened by its increased thickness while its stability is improved by the insert’s wide support surface.
R/L hand type inserts with 70° corner angle
» Left & right unique cutting edge for forward and backward turning
» L insert + L holder and R boring bar
R insert + R holder and L boring bar
Cutting conditions and chip control range
XNMV BM’s Backward turning chip control range
XNMV BM’s Forward turning chip control range
POS-S-TURN (XNMV)
All Directional Turning with Positive 4 Cutting Edge Negative Insert
- Double sided negative insert with high positive 4 cutting edge
- Reduced cycle time due to all directional multiple turning with one tool
- High productivity due to high feed backward turning
- Low cutting force and good chip control
- Rigid T-holder clamping system and high-pressure coolant supply
- Available for steel and super alloy machining
All Directions with No Downtime and High Feed Turning
TaeguTec has solved the problem of increased downtime with the innovative multi-directional SFEED-TEC POS-S-TURN, which easily machines steel as well as super alloys. This new line of holders and inserts doubles the cutting edges on positive rake 4 cutting edge inserts. Its precise and stable insert positioning in all cutting directions is handled by the T-Holder’s clamping design and exclusive carbide shim, strong clamping force and rigid pocket structure. The double-sided ZNMV inserts perform with low cutting forces, has double the number of cutting corners and efficiently controls the flow of chips. This ingenious multi-functional tool is perfect for back and forth turning, profile and undercut machining without exchanging holders. Furthermore, the outstanding POS-S-TURN line maximizes productivity because of its unique high feed turning capability, especially in back longitudinal and back face turning applications.
General purpose and high feed turning
| ZNMV-BM insert with TZQNL holder |
| ZNMV-BS insert with TZQNL holder |
Finishing and high feed turning
| ZNMV Y-BF insert with TZQNL holder |
RHINO-X-TURN (XNMG)
Double-Sided Versatile Insert with 70° Corner Angle
- Multiple applications for external turning, profiling, facing and boring
- Integrated shape of C-type and D-type
- Double-sided insert with low cutting force and less vibration
- Wide range of chip control from medium to finishing
- For machining of steel materials
X Marks Versatile Turning Line with 70° Corner Angle
The new SFEED-TEC RHINO-X-TURN line of inserts and holders is a multifunctional line for internal and external turning, face turning and profile turning. The XNMG inserts demonstrate good chip control and stable tool life in a wide range of operations from medium to finish turning, and its low cutting force enables good surface finish with less vibration. Also, the insert’s thickness increases rigidity and stability for excellent performance in automotive parts machining. Its ability to machine complicated shapes like internal chamfers without replacing the holder means improved productivity.
Multiple applications
RHINO-M-TURN (C/W/DNMX)
Cost-effective Double-Sided Mini Size Insert
- IC=7.0 mm mini size double-sided insert
- Suitable for small dia. boring applications
- Good chip control at max. 2.0 mm low depth of cut for finishing
- Low cutting force
- Screw-on clamping
- Cost-effective solution replaceable for ISO positive insert
Double-Sided Mini Line for Small Parts Turning
The SFEED-TEC RHINO-M-TURN is a compact, double-sided mini size insert for the internal and external turning of small parts and replaces standard positive small inserts like CCMT 06 and DCMT 07. Its low cutting force results in minimal vibration, as well as good workpiece surface finish and machining accuracy; particularly at max. 2.0 mm low depths of cut. In addition, the strong screw clamping design exerts stable machining during operations.
– Boring is the main application – Small Dmin. Ø16 mm – Low cutting force, less vibration – Screw clamp |
HUSH-BORE (QH/QS)
Head Changeable Anti-Vibration Boring Bar
» Anti-vibration damping bar for deep boring machining up to 10 x BD
» Variety of exchangeable heads
» Stable and rigid clamping system
» Internal coolant supply
» High productivity with high feed and high depth of cut
Vibration Free Boring Bar Line with Exchangeable Heads
Advance Machining has reached new levels with the vibration free SFEED-TEC HUSH-BORE; a line that efficiently performs deep internal turning at an incredible 10xD. In order to reach high speeds and feeds without damaging the workpiece, spindle, insert and so on, TaeguTec’s Advance Turning team developed a revolutionary damping system located inside the shank which results in a smooth surface finish as well as an internal coolant supply for longer tool life and stable machining due to the rigid clamping system. All these technologically advanced features also increase feeds and cutting speeds, making it highly productive. In order to provide a full range of options, HUSH-BORE is available in many different diameters and in a few tool lengths. The various exchangeable heads can be securely fastened with an unrivalled serrated coupling located in the boring bars.
COOL-BURST (T…-TB)
RHINOTURN T-Holder with Pinpointed High Pressure Coolant
For large part machining in the wind power, shipbuilding and power plant industries
- Pinpointed high pressure coolant directly to the cutting edge
- High productivity due to increased cutting speed and feed
- Improved tool-life and chip control
- Strong clamping force and stable machining with T-holder type
- More efficient in machining of difficult-to-cut materials
- Recommended coolant pressure 70 bar. Max 140 bar
Bursting Accurate High-pressure Internal Coolant Supply
SFEED-TEC COOL-BURST is a highly effective line for the machining of heat-resistant alloys such as Inconel, titanium and difficult-to-cut materials like stainless steel. The line’s internal pinpointed high-pressure coolant supplying system boosts productivity by efficiently shooting directly to the cutting edge of the rake face and flank face through both the upper and lower coolant channels. Besides the enriched and unique shooting feature, productivity is heightened due to the line’s optimal chip control and strong clamping force that stabilizes machining at greater speeds and feeds while also improving the life of the tool. Unlike the conventional lever type external coolant supply holders, the line’s coolant bursts with pinpoint accuracy up to 140 bar directly from the top clamp without any additional components.
A Variety of High-pressure Coolant Type Tool-Holders
CUT-SFEED (SFC/J)
High Rigid Single-ended Inserts and Holders for
Parting and Deep Grooving
- High rigid single-ended inserts for parting and deep grooving
- Ultra rigid 3 pocket triangular blades and blocks (SFTB, TGTB, THTBR/L-TB)
- High rigid blades and integral type holders (SFGB, SFER/L)
- Ultra stable machining under general and unstable conditions
- High productivity with high feed and stable machining
- Good chip evacuation and tool life with high pressure coolant (-TB)
- Maximum cutting diameter up to Ø120 mm
Advanced Parting, Deep Grooving with Premium, Unique CUT-SFEED
The evolution of parting and deep grooving applications has arrived with two superior Golden SFEED-TEC CUT-SFEED types. The premium line’s specialized characteristics and advanced single-ended thicker height insert is more robust, stable and can propel the tool at greater speeds and feeds compared with conventional self-grip types. The CUT-SFEED’s incredible and unique features enable improved surface roughness, insert position repeatability and tool life even under tough machining conditions. Furthermore, the advanced Golden CUT-SFEED line offers a high-pressure coolant option that blasts from the top as well as the bottom of the holder directly onto the cutting edge resulting in excellent chip evacuation at higher speeds and feeds.
The other offering in the CUT-SFEED line is the groundbreaking and enhanced triangular blade type. This technologically advanced SFEED-TEC tool comes with three insert pockets and offers superior rigidity, which minimizes vibration and provides excellent machining surface roughness in general, high feed or interrupted machining conditions. The triangular blade’s remarkable innovation offers a highly stable clamping structure that contributes to increased productivity and tool life. The envy of the market, CUT-SFEED holders come in several insert sizes.
Reinforced Single-ended Insert for Parting and Deep Grooving
Ultra Rigid 3 Pocket Triangular Blade and Block
Reinforced Blade with Stable Machining
QUAD-RUSH (TQS/J 20)
Multi-purpose Small Size 4 Cutting Edge Grooving Insert
for Small Parts Machining
For effective machining on steel and stainless steel
- Cost-effective 4 cutting edge insert
- Rigid and very stable screw clamping
- Small size insert and holder for swiss type automatic lathes
- Multiple applications for grooving, parting, turning, profiling, threading and next to shoulder machining
- Precise and clean surface finish during small parts machining
- Good chip control and longer tool-life due to high pressure coolant supply
Reimagining the Impossible with Small Size QUAD-RUSH line for Swiss Type Automatic Lathes
The original, always duplicated, seldom perfected cost-effective 4 cutting edge QUAD-RUSH line, is now miniaturized for Swiss type automatic lathes. This innovative Advance Machining SFEED-TEC multi-purpose tool is the smallest line on the market that can perform the full gamut of turning operations such as grooving, turning, profiling, threading and parting. Due to its unrivalled relief angle, the new and small SFEED-TEC QUAD-RUSH line has overcome the impossible by performing left and right directional machining next to the shoulder. In order to reach remarkable high feeds and speeds without damaging the workpiece, insert or holder, the line is available with a technologically advanced coolant system that jets out of the holder onto the cutting edge to evacuate chips easily and effectively. Furthermore, because of its special edge treatment for sharp cutting edges and a new PVD coated grade, tool life has been improved, offering precise and excellent surface finish with less burrs and built-up-edges. What makes this line even more impressive is the unique size of the tool holder that was specifically developed to fit onto Swiss type automatic lathes and comes with a rigid and unsurpassed stable screw clamping system that provides unmatched tool life, as well as excellent insert position repeatability.
QUAD-I-RUSH (TQIS)
Internal Shallow Grooving 4 Cutting Edge Insert
Ground positive ISO inserts for high precision turning
- Double-sided insert with rigid screw clamping
- Economical 4 cutting edge
- Can be mounted on both right-and left-hand tools
- Good chip control and surface finish
- Internal coolant supply
Precise Internal Shallow Grooving with Hybrid 4 Cutting Edge Insert
The unique and innovative SFEED-TEC small size QUAD-I-RUSH line is a highly reliable, wide-ranging, precise internal grooving solution that uses the QUAD-RUSH’s powerful and rigid three-area contact screw clamping system that firmly holds the insert in place. Another important industry first is that the hybrid and economical double-sided inserts mount on both right- and left-hand tools. The QUAD-I-RUSH 4-cutting edge insert is capable of internal grooving with excellent chip control and superb surface finish. The unique and sophisticated strong clamping system ensures accurate insert position repeatability when indexing insert corners, and stable performance even in high-speed and high feed conditions. Its internal coolant supply system ensures not only highly effective chip evacuation but longer tool life.
MINI-I-RUSH (TMIS)
Internal Shallow Grooving for Machining of Small Diameter
» Single-ended mini size insert for internal grooving
» Strong screw clamping and unique clamping structure
» Cost-effective solution and no set-up time vs. solid carbide tools
» Neutral type of insert and holder reduce inventory
» Good surface finish and tool-life in small parts machining
» Internal coolant supply
Unique Mini Inserts and Holders for Internal Grooving
TaeguTec’s SFEEDTEC innovative and unique MINI-I-RUSH is a small diameter internal grooving solution with a robust three-area contact structure of the insert and holder for the prevention of vibration and holder breakage during internal grooving operations. This Advance Grooving line’s highly effective inserts ensure the repeatability of the position of the insert’s cutting edge and offers excellent surface finish and durability. But one of the unique features of this technologically advanced miniature line is the neutral holder that can mount the range of the line’s inserts in four positions (top, bottom, right and left); a sophisticated feature that offers easy set-up and convenient stock management. The unrivalled and industry-first rigid insert clamping system offers accuracy and reliable machining when performing internal small diameter operations. To improve tool life and chip evacuation, the line comes with a highly sophisticated feature that shoots coolant directly on the cutting edge.
FACE-RUSH (TDFX)
Unique Shallow Face Grooving Insert for Multiple Applications
Whisker reinforced ceramic grade for machining high strength and high temperature alloy materials
- Multiple applications
- Highly effective in face grooving with stable machining
- Strong screw clamping and rigid insert
- Excellent chip evacuation
- Pinpointed high-pressure coolant
Unique Clamping, Rigid Inserts, Stable Holders, Outperform in Shallow Face Grooving
TaeguTec’s SFEED-TEC FACE-RUSH line employs a unique and innovative clamping system and insert design concept not seen in the metalworking industry. The genius additions to the line solves the frequent breakage challenge that conventional tools endure due to the holder’s vulnerability. The unique multi-functional line utilizes an insert with anti-rotating triangular grooves on the bottom side, in addition to a screw clamping design that makes the insert incredibly robust and stable when seated in the holder. Even if the cutting edge in use is damaged during machining, the opposite side of the cutting edge can be quickly used in its place. The Advance Grooving FACE-RUSH line absorbs heavier side forces which allows for face turning operations at much higher feed rates, which, in turn, increases productivity. The FACE-RUSH’s increased insert thickness strengthens stiffness, improves stability and prevents abrupt breakage. The highly effective insert clamping mechanism uses a screw without an upper jaw making it easy to machine complicated small parts at higher feed rates and harsh conditions without any chip evacuation problems like no other similar tool in the industry. FACE-RUSH also comes with a pinpoint high-pressure coolant system at the cutting edge that accentuates all these features, improves tool life and helps to easily increase feed rates while offering incomparable chip evacuation.
TSG-HF CBN Inserts
High feed Turning CBN Insert for Hardened Steels
- High productivity with high feed rate up to 1.2 mm/rev turning machining
- Small depth of cut up to 0.12 mm machining
- Excellent surface finish
- Good chip control
- TB2015 CBN grade for continuous and light interrupted machining
High Feed CBN Insert Line for Hardened Materials
TaeguTec’s T-Clamp CBN insert is designed to enable bi-directional high feed turning and obtain superior surface finish due to the natural bending of the T-Clamp holder during machining as well as excellent chip control. With a maximum feed rate of 1.2 mm/rev and a small depth of cut up to 0.12 mm machining, this high feed CBN line greatly contributes to the productivity improvement of high-hardened automotive parts such as shafts, gears and transmissions. Furthermore, it enables at least more than twice of the high feed machining performance when compared to conventional turning CBN wiper inserts. The line’s CBN grade maximizes productivity of continuous and light interrupted machining.
RhinoTurn 2019
New External Holders with Double-Sided Inserts for Swiss Type Automatic Lathes
For Swiss type automatic lathes, hook-leaver type holders for conventional double-sided RHINOTURN inserts come as the only option in the miniature machining market. Now, TaeguTec has introduced screw clamping type sleeve holders and external holders for external machining that generates better precision and clamping force for Swiss turn machining. The newly added holders (sleeve and external type) are fitted with double-
sided RHINOTURN inserts, with twice the number of corners compared to the competition’s holders for ISO positive inserts.
The new sleeve holders can be mounted to the rear tool post for complex geometry applications in external
machining. Available as T-BURST standard items and in several shank sizes, the new line accommodates all Swiss type automatic lathes.
External holders are available for C, D, T and V type inserts to meet the demands of a variety of applications. Available in three shank sizes – 12,16 and 20 mm – the external holders are suited for Swiss turning.
The external holders are also available as standard T-BURST items to cover the widest range of Swiss turning applications.
Features
Screw clamping type sleeve holder
- Holders for D type inserts mount to the rear tool post
- Eliminates the shortage of tool posts when machining complex geometries
- T-BURST holders enable excellent chip evacuation, improved tool life and machining stability
- Available in all shank sizes for Swiss type automatic lathes
Screw clamping type external holder
- Four holders for C, D, T and V type inserts are available to meet the wide range of applications
- Available in three shank sizes to suit all Swiss-Turn machines: 12, 16 and 20 mm
- T-BURST holders enable excellent chip evacuation, improved tool life and machining stability
TMS-SDUNL
Sleeve holder
Spare parts
TMS-SDUNL-TB
Sleeve holder
Spare parts
SCLNR-RS
External holder
Spare parts
SDJNR-RS
External holder
Spare parts
SDJNR-RS-TB
External holder
Spare parts
STGNR-RS
External holder
Spare parts
SVJNR-RS
External holder
Spare parts
SVJNR-RS-TB
Extender holder
Spare parts
SOLID-3-DRILL (3HD)
High Productivity Solid Carbide Drill with
Triple Cutting Edges
CB – PCD insert with serrated cutting edge
- High productivity with triple cutting edge
- Excellent self-centering capability
- Premium hole quality
- Stable machining in high cutting conditions
- Smooth chip evacuation with polished flutes
New 3 Flutes Solid Carbide Drill for Increased Productivity
As part of TaeguTec’s new SFEED-TEC series of technologically advanced cutting tools, the SOLID-3-DRILL line increases productivity due to the higher number of teeth, and its excellent edge design improves machining stability in high cutting conditions especially in steel and cast iron machining.
Solid carbide drills
DRILL-SFEED (3ED)
Head Changeable 3 Effective Cutting Edge Drills
- Self-centering P+ geometry and premium hole quality
- Higher productivity thanks to 3 effective cutting edges
- No set-up time with user-friendly clamping
- New TT5130 grade for high-speed machining
- Diameter Ø15.0 mm – Ø20.9 mm & 0.1 mm increments range
New Head Changeable Drill with 3 Flutes to Maximize Productivity
With its head changeable, 3 flute design and unique geometry, the DRILL-SFEED ensures superior performance and enhances machining stability during high-speed machining operations. Furthermore, its unique self-centering capability offers outstanding performance compared to conventional 3 flute solid carbide drills.
Holders
Head
DRILL-RUSH (TCD)
P+ Self-centering Head-changeable Drills for Premium Hole Machining
- Head-changeable quick change system
- Premium hole quality due to self-centering cutting edge (P+)
- Minimize process more than 8xD deep drilling without the need for a pilot hole (P+)
- High productivity in short depth of drilling (P+)
- Deep drilling capacity up to 12xD
- Excellent surface finish and smooth chip evacuation
- High flexibility with one drill body for a series of different sized heads
- Various types of drill heads
Premium Hole Making with unique Self-Centering P+
TaeguTec’s flagship drill line, the DRILL-RUSH, with its ingenious quick change system, ultimate self-centering geometry and high balancing forces at the penetration point has been redesigned into a revolutionary design upgrade that is changing the drilling game for the better.
The highly effective and innovative edge geometry penetrates materials softly, easily and smoothly with accurate hole sizes as well as performing excellent surface finishes.
Overall, the new Advance Drilling P+ geometry offers optimal solutions for improving productivity and reducing costs with exceptional performance and longer tool life.
The innovative design enables the SFEED-TEC DRILL-RUSH to drill deeper, over 8xD without a pilot hole and in turn, improves productivity.
Holders
Heads
Economical drill for pre-thread holes
- Higher productivity compared to solid carbide drills
- Optimal balanced cutting performance with double effective design
- Available for both blind & through-hole applications from M8 to M24
Economical drill for pre-thread holes
- Compatible with DRILL-RUSH
- Available for TOP-DRILL and T-DRILL with 3XD, 4XD
- Adjustable step length
- Minimized cycle time credit to drilling / chamfering as a single operation
MODU-R-DRILL (MDB)
Unique Modular System for Various Drilling
Diameters and Depths
- Economical solution with modular system
- Double effective design for higher productivity
- Good positioning and hole straightness
- User-friendly modular clamping system
- Smooth chip evacuation
Modular Type Indexable Drill for Large Diameter Hole Drilling
SFeedTec’s modular type MODU-R-DRILL line, provides superior machining and excellent hole quality for hole machining of 26 mm diameter and above, as well as improved productivity due to the symmetric design that reduces tool cost yet expands the range of MODU-R-DRILL applications.
Holders
Inserts
Economical drill for pre-thread holes
- Higher productivity compared to solid carbide drills
- Optimal balanced cutting performance with double effective design
- Available for both blind & through-hole applications from M8 to M24
Economical drill for pre-thread holes
- Compatible with DRILL-RUSH
- Available for TOP-DRILL and T-DRILL with 3XD, 4XD
- Adjustable step length
- Minimized cycle time credit to drilling / chamfering as a single operation
SFEED-TURN (FCMX)
High Feed Trigonal Type Positive Insert for Bi-directional Turning
» 6 cutting edge (3 index) positive type insert
» High feed machining with max. feed rate 3mm/rev
» Reduced cycle time due to bi-directional continuous turning
» Strong clamping and stable machining due to anti-rotating design
» Top and bottom internal coolant supply
» Optimized chip breaker
Right or Left Bi-directional Turning Quickens with Golden Line
Bi-directional continuous turning has reached greater heights with the new Golden SFEED-TEC TURN-SFEED family of inserts and holders. The line’s incredible feed and excellent chip control qualities are made in part to the 6 cutting edge (3 index) positive type high feed trigonal turning insert that is accentuated with anti-rotating grooves on the bottom side and an optimized chip breaker. Smooth machining and great performance during max. 3mm/rev high feed turning is achieved with the ingenious, anti-rotating design and is equipped with a strong and robust screw clamping feature. Tool life and chip control have been drastically extended with the line’s top and bottom coolant supply. The holder’s strong clamping feature easily performs both left and right directional turning without having to change the tool holder; in doing so, the Golden TURN-SFEED line reduces cycle times and machining downtime.
Capable of left and right bi-directional continuous turning
MILL-SFEED (CVKT)
UMini Sized 90° Shoulder Mill and High Feed Mill
with Strong V-Shaped Insert
- Smallest insert
- V-Shaped insert
- High productivity with maximum No. of teeth
- High positive rake angle
- High feed insert
Benchmark Mini 90° Machining End Mill
SFEED-TEC’s MILL-SFEED family is the benchmark line for manufacturing small parts and the miniature industry. It is also designed to replace the machining range of solid carbide end mills from Ø6 mm (1z) and Ø8 mm (2z). The advantage of this family of cutters and exchangeable inserts is that it improves productivity and reduces costs compared to solid carbide end mills. Designed for various applications, the three kinds of MILL-SFEED inserts in the line cover general applications, finishing due to its low cutting force as well as one type that is reserved for high feed conditions.
» Small diameter of endmills : Ø6 mm (1z), Ø8 mm (2z)
» Higher-stiffness core diameter over the competitor’s APKT type cutter
» Increased productivity due to high ramping angle
» Covers a wide variety of applications
TANG-SFEED (LPKU)
High Productivity Shoulder Milling with
Strong Tangential Insert
- Strong and reliable insert
- Strong tool body with larger core size
- High productivity with more teeth and ramping-down application
- Soft machining with high positive rake angle
- 90° shoulder milling
Golden 4-Corner Tangential Rectangular Inserts
The SFEED-TEC golden TANG-SFEED line is a double-sided four-corner tangential insert line capable of ramping applications. Its high positive helical cutting edge is designed for high machining performance. TANG-SFEED is available in three insert sizes: 05, 09, 14 mm and related cutters. The line is accentuated with the general purpose LPKU insert and a high-precision LPHU insert. Additionally, the 05 mm smaller size insert is capable of being mounted to Ø10mm (2z) end mills. Moreover, its unique geometry empowers better productivity across a diverse range of high feed applications.
CHASE-4-MILL (4NKT)
90° Shoulder Mill 4 Cutting Edge Insert with
High Ramping Capability
- High productivity with high step milling and high ramping down angle
- Double-sided 4 corner insert
- Various insert options and cutter range
- Very stable machining with strong insert and unique pocket design
- True 90° shouldering milling
90 Degree Line, 4 Corner Insert with High Ramping Down Application
TaeguTec’s compact four corner double sided insert – the 4NKT insert for end mills, modular end mills and face mill cutters – with its 90⁰ entering angle insert, is the perfect solution for increased productivity of high step down milling and high ramping down operations. Its high positive geometry generates low cutting force while the cross edge insert geometry prevents unexpected insert failure. The insert thickness and high strength combined with the cutter’s wide bottom for improved clamping enables excellent high stability and productive machining. All cutters include an internal coolant supply for efficient chip evacuation that prevents built-up-edges.
CHASE-8-MILL (SQKU)
90° Shoulder Mill with
8 Cutting Edge Square Insert
- Economical double-sided insert
- Strong tool body and high positive insert
- High productivity with maximum No. of teeth
- 90° shouldering with wiper flat insert
- Good chip evacuation
8 Corner Double-Sided Insert Line for True 90° Machining
SFEED-TEC’s CHASE-8-MILL line, with its double-sided inserts, performs true 90° machining. Its high axial geometry reduces cutting loads and vibration yet achieves high productivity. The line’s optimized design enables minimal mismatch during 90° deep shoulder milling, and the inserts flat bottom wiper improves surface roughness. CHASE-8-MILL’s variety of inserts and cutters for end mills, modular types and face mills enables excellent performance on a variety of applications.
CHASE-12-MILL (HXKU)
45° Face Mill with High Positive Economical
12 Cutting Edge Insert for Higher Productivity
- High productivity with maximum No. of teeth
- Strong tool body and reinforced cutting edge
- Economical 12 edge insert
- 45° face milling
12 Times the Productivity for Face Milling
SFEED-TEC’s new CHASE-12-MILL HXKU line is a 45° entering angle cutter with a double-sided 12 corner insert that improves productivity in heavy machining and roughing applications. Its reinforced cutting edge inserts and optimized cutter design (semi-tangential positioning) is a reliable choice for high feed machining. The CHASE-12-MILL’s excellent chip evacuation is due to the line’s high radially inclined angle, and its increased cutter body stiffness helps to minimizes vibration. Its maximum number of teeth offers significant productivity gains in facing applications of general steels and cast iron.
Variety of applications
CHASE-10-MILL (PTKU)
High Feed and 65° Face Mill with
Double-sided Pentagonal Insert
- High feed milling and 65° face milling with same insert
- Economical double-sided 10 cutting edge insert
- High positive rake angle
- Sstrong insert cutting edge
- Good chip evacuation
Economical, Ten Corner Double-Sided High Feed Face Milling Line
The CHASE-10-MILL PTKU is an economical, double-sided, ten cutting edge line specifically dedicated for high feed machining. Available in two sizes, 05 mm and 10 mm; the multi-corner inserts have a maximum cutting depth of 1.5 mm and 3.0 mm, respectively. The PTKU line covers a wide industrial range including mold and die and general engineering applications.
CHASE-4-FINISH (4WHU)
Super Finish Mill with
Semi-Tangentially Clamped Wiper Insert
- Super surface finish with wide wiper geometry
- High positive 4-corner insert
- No set-up time with special tool design
- Insert for aluminum, steel and cast iron
Non-Adjusting Screw Type Insert, Cutter Line for Super Finishing
The SFEED-TEC CHASE-4-FINISH line’s direct screw mounting system eliminates the required run-out adjustment of cutters while performing finishing operations, therefore eliminating the need for extra set-up time. The arrangement of the cutter’s unique cutting edges and design optimizes surface roughness while machining depths of cut of under 0.5 mm and reduces set-up time. The double-sided 4 corner 4WHU insert’s long wipers enable excellent surface roughness during machining and is especially suited for a variety of materials from aluminum to steels and cast iron. The CHASE-4-FINISH’s improved tool life and chip evacuation is benefited by the insert’s high axial rake angle.
* Optimal arrangement of cutting edges in Ø100 mm cutter with 8 teeth and 1 wiper pocket for ultra surface finish
CHASE-V-QUAD (SVKT)
Extended Flute End Mills for Heat Resistant Super Alloys with
Unique Rigid V-bottom Insert
- For titanium and high temperature alloys
- Reinforced V-shape insert with self-positioning
- High productivity with fine pitch cutter
- Soft machining and minimized mismatch
- Multi coolant supply to the cutting edge
- Good chip evacuation and less vibration
Extended Flute Cutter for Difficult-to-Cut Machining
The SFEED-TEC CHASE-V-QUAD SVKT is a new line that ensures excellent performance while machining various difficult-to-cut materials such as heat-resistant alloys and titanium alloys used in the aerospace industry, as well as austenitic stainless steel, duplex and PH series materials. The Extended Flute Cutter line has a reinforced V-shape insert with self-positioning capabilities, high productivity due to its maximum number of teeth, a multi-coolant supply channel to the cutting edge, minimizes mismatch in deep shoulder milling and excellent chip evacuation with less vibration.
NAN-RUSH (HFN)
Nano Indexable Insert for High Feed Milling
- High feed geometry
- Nano size insert
- Very high ramping down angle
- Direct coolant supply to the insert’s cutting edge
- Simple and strong screw clamping
A wide variety of applications
SFEED-TEC’s NAN-RUSH is a dedicated milling line for miniature components under high feed conditions and is available in Ø6 and Ø8. Equipped with two teeth, the insert type line is optimized for the machining of smaller, confined areas. The innovative line replaces smaller diameter solid carbide end mills and is very economical as it eliminates the need for regrinding and recoating. NAN-RUSH can be applied to a wide variety of applications in various industries, including miniature and small parts machining as well as mold and die.
A wide variety of applications
MILL-RUSH (3PKT)
True 90° Shoulder Milling Solutions
with High Positive 3 Cutting Edges
- Super high positive helical cutting edge insert
- True 90° shoulder milling with very smooth and soft machining
- High productivity with maximum No. of teeth
- Strong tool body with larger core size
- Various insert geometry
- Small Ø8mm endmill with mini size 3PKT-04 insert
Super high positive insert with 3 cutting edges
TaeguTec’s technologically advanced next generation milling line, the SFEED-TEC MILL-RUSH, is the perfect tool for manufacturers operating, but not exclusively, in the general milling, die and mold and aerospace industries.
The MILL-RUSH line provides an innovative and highly productive true 90° milling solution with 3 helical cutting edge inserts for improved economy as well as thicker inserts that are stronger than conventional 2 edge inserts.
The unrivalled 3PKT 04 insert and associated cutters expands TaeguTec’s highly effective and popular milling line into one that can effectively handle more applications than before.
With the 3PKT line’s highly effective 3 helical cutting edges and optimized high positive axial rake angle, the line has matured into a sophisticated and highly productive true 90° milling powerhouse. Moreover, the smaller size inserts improves productivity due to a higher number of inserts added to the related cutters.
Overall, the state-of-the-art MILL-RUSH line works superbly on light and smooth cuts with less vibration and less cutting forces on the inserts and cutter body; all important factors that increase tool life and reduces power consumption.
As part of the inventive and enriched SFEED-TEC family of tools, the design for the MILL-RUSH line highlights TaeguTec’s superior cutting tools that are fast, durable and exact.
MAXI-RUSH (MX..)
New Head changeable Solid Carbide End Mill
- No set-up time with unique clamping system
- Cost effective end mill
- Wide variety of applications with exchangeable heads
- Heads for 5 axis profiling (MXCSL, MXCSO)
- Strong and precise double-clamping system
- The latest universal grade for various materials and applications
Head-Indexable Type Solid End Mill
With its innovative head-indexable feature and overall outstanding advantages, the SFEED-TEC MAXI-RUSH end mill replaces most of the existing conventional solid carbide end mill in its class. The quick and easy replacement of the line’s heads coupled with its excellent accuracy and optimized grades make it a superior performer that increases productivity on a variety of applications and a superb choice for today’s machining needs. To combine the widest flexibility in tooling solutions, MAXI-RUSH is offered in many head types as well as various shank holder lengths.
MAXI-SLOT (TR-)
Quick Changeable Solid Carbide Head for
Multiple Machining
- Slotting, Facing and Threading Head
- No set-up time with unique clamping system
- High productivity with maximum No. of teeth
- Various applications with exchangeable heads
- Good chip evacuation
- Less vibration with shorter overhang
Head Exchangeable Line for Dedicated Slotting Applications
SFEED-TEC’s MAXI-SLOT is an optimized slotting line that outperforms equivalent insert types. It is a line dedicated to the machining of mini-sized machinery components and other slotting applications. MAXI-SLOT’s unique yet simple design allows for precise and rigid mounting of a head exchangeable slotting cutter with the use of only one clamping screw, thereby eliminating the need for additional setup time. Its maximum number of teeth and additional cutting edges presents a more productive solution compared to slotting insert types of the same diameter. Additionally, the exchangeable head can be used in other machining applications including facing and threading.
CERAMIC-SFEED (BNGX)
NEW SiAlON Ceramic Mill for High-Speed Machining of Super Alloy
- For supper alloy material
- High feed and high-speed geometry
- High productivity
- Good chip evacuation
Merging Speed, Feed to Tackle Super Alloys
SFEED-TEC’s CERAMIC-SFEED line answers the demand from the aerospace and power generation industries for a high-speed milling tool that improves the output of products made with super alloys. The line combines speed and feed machining on difficult-to-cut materials by uniquely merging a ceramic grade for high-speed machining and a large radius shape for high feed machining.
CERAMIC-SFEED should be used under high-speed conditions(V=600~1,200 m/min), and it is used for roughing as it is accompanied by thermal deformation due to heat generation.
CERAMIC-SFEED (CR.)
Solid Ceramic End mill for High-Speed Machining of Super Alloy
- Solid ceramic endmills with TC3030 SiAlON grade
- High-speed and high feed machining for high productivity
- Optimal cutting edge for nickel based super alloys
- Less vibration with unequal spacing cutting edge
Solid Ceramic End Mill’s Superior Productivity of Super Alloys
SFEED-TEC’s ceramic end mill, with the TC3030 grade, is optimally suited for the machining of nickel based super alloys such as Inconel. To achieve high-speed and high feed output, the line’s features include unequal spacing of cutting edges, a high helix cutting angle and optimized edge geometry with cutting edge after-treatment; all features that gives the line superior productivity compared to carbide end mills. The ceramic end mill line is available in both 4 flutes, 6 flutes corner radius types, as well as a high feed 4 flutes type.
CERAMIC-SFEED should be used under high-speed conditions(V=300~1,000 m/min), and it is used for roughing as it is accompanied by thermal deformation due to heat generation.
Solid Ceramic End mills
